Self-Measuring Option
If you are outside our Professional Survey area, you can still order from Easy DIY Doors by providing your own measurements using this self-measuring guide.
Please follow the measuring instructions carefully and provide all measurements exactly as requested.
How to Measure for Replacement Doors
Getting the right size is simple — all you need is a tape measure, a steady hand, and a couple of minutes per door or drawer.
1
Open Your Existing Door or Drawer Front
This makes it easier to measure accurately and ensures you don’t accidentally include the cabinet frame in your dimensions.
2
Measure Height
& Width
IMPORTANT: Always record measurements as HEIGHT x WIDTH.
Measuring an existing door or drawer front:
Measure the exact finished size of the existing door or drawer front to the nearest millimetre. Do not make any deductions from these measurements.
If an existing door or drawer front is missing:
Measure the unit opening and deduct:
5mm from the HEIGHT
4mm from the WIDTH
This gives you the
required finished door or drawer front size.
3
Note Hinge Hole Positions
(if applicable)
If you’d like us to drill hinge holes, measure from the top and bottom edges of the door to the centre of each hinge hole. Also note whether they’re on the left or right side.
4
Double-Check Before Ordering
Measure everything twice — it’s a small step that avoids frustration later.
Important – Customer-Supplied Measurements
Where you choose to provide your own measurements, the accuracy of those measurements is your responsibility.
Easy DIY Doors will manufacture and supply made-to-measure products using the measurements and information you provide.
Please check all measurements carefully before submitting them.
We cannot accept responsibility for products that are manufactured correctly to the measurements supplied by the customer but are subsequently found not to fit because those measurements were incorrect.
